THE BLACK BOX TOOLKIT USB response pad pricing

所有的响应都以USB主机为主机。您可以选择添加一个8路TTL引线,允许每个1-8按钮在每个按钮按下期间产生一个唯一的TTL信号。另一种选择是添加一个单发TTL铅,当任何按钮被按下时,它会产生一个50毫宽5伏TTL触发器。

4 button response pad (standard layout)

Standard 4 button response pad in default layout (std white buttons).

8 button response pad (standard layout)

Standard 8 button response pad in default layout (std white buttons). As standard 4x external button sockets are provided.

Option for up to 8x external buttons or hand-held response buttons/triggers

By default our all our USB response pads support up to 4x external buttons via standard 3.5 mm sockets. If you wish to make use of up to 8x external response buttons, or hand-held response buttons/triggers, you have the option to upgrade your response pad and include 4x button splitter cables.

Hand-held response buttons/triggers

Thermoplastic rubber hand-held response button/trigger in black with single push button and 2 m cable. Terminated in mono 3.5 mm jack.

Foot switch pedal

Polarity switchable non-latching foot switch with a 1/4 inch jack connector which sends a make (down) or break (up) signal. A rubber grip ensures the pedal stays in place during use. 2 m cable terminated in mono 3.5 mm jack (via adapter).

Custom laser cut button layout

You can customize your button layout by purchasing a blank lid (202 mm length x 137 mm width) and then elect where to place 4x standard white buttons.

Each additional hole together with standard white button after the first 4x locations of your choosing incurs a small charge as shown below. Two examples are shown below along with custom hand-held response buttons/triggers.

源自：深圳市湾边贸易有限公司，图文仅供参考。

注：本文章所有涉及到的产品公司名称、商标、LOG0、产品图片、产品说明、产品品牌名称等，其商标版权等一切知识产权归对应品牌所有;在文章仅用于方便产品识别。